Network connectivity requirements

IPv6 Support

Trust Protection Platform supports the IPv6 protocol across the product with one exception: for network discovery, IPv6 is not supported for network discovery jobs.

Network access requirements

Platform requirements

There are a number of systems that require network access to be enabled for Trust Protection Platform to run.

  • All Venafi servers need access to the database server
  • If using an HSM to (1) encrypt private keys, credentials, and other secrets stored in the Venafi database, or (2) for the central generation or storage of private keys, all Venafi servers need access to the HSM.
  • If using an identity provider, like Active Directory or LDAP, all Venafi servers need network access to the identity infrastructure.
  • Each Venafi server that has the Event Processing component enabled must have access to the configured logging channels. For example, email server, syslog, SMTP, etc.
  • For each Venafi server that has a web service enabled (e.g. UI consoles, Web SDK, Agent service, etc.), all clients that are connecting to the service must have network access to the Venafi server, either directly or through a proxy.

Feature-specific requirements

Most features in Trust Protection Platform can be configured to only use a subset of servers to use that feature. For example, when integrating with a certificate authority, the Venafi server(s) integrated with that certificate authority need network access to connect to that certificate authority, but other servers in your cluster would not need that access.

There are three ways you can control what Venafi servers need access:

Most product features have a Network Access component for the feature. We recommend you review what features you plan to use, as well as which Venafi server(s) will be responsible for these features, and configure network access accordingly.

Port requirements

Depending on your environment, Trust Protection Platform can use the following ports:

Venafi Trust Protection Platform Port Requirements

Port

Description

Default Port Assignments

80

While Venafi Platform provides several methods of ensuring encryption of traffic, Port 80 binding is ONLY required if you are using SCEP or the Time Stamp Service endpoints, as these features require http access to the internet to function correctly.

If you are not using SCEP, and you don't care if the Time Stamp Service endpoints in CodeSign Protect can get timestamping data, you can disable Port 80 binding in IIS.

All other Venafi web services will continue to function if access to port 80 is blocked.

443

Hyper Text Transfer Protocol Secure (HTTPS) should be enabled if Policy Tree is secured with a certificate.

50443

This port is used by Trust Protection Platform to handle certificate requests via Enrollment Over Secure Transport (EST) protocol. Allow this port only on servers which will handle such requests.

Operational Port Assignments

135

Trust Protection Platform communicates with the Microsoft Certificate Services and the server hosting Internet Information Services over DCOM.

The default DCOM port is 135 (dynamic port range 49152-65535). Trust Protection Platform contacts the IIS application on port 135; however, the application returns its response on a different port. This can pose a problem in a firewall environment. For information on configuring DCOM with firewalls, see the following Microsoft Technical Document: http://support.microsoft.com/kb/154596.

21

Port 21 can be used for sending reports via the FTP protocol. Reports can also be sent using the SMB protocol (port 445).

22

Trust Protection Platform uses the Secure Shell protocol (SSH) to communicate with servers and appliances. The default SSH port is 22.

SCP and SFTP run as subsystems of SSH on port 22.

Trust Protection Platform supports Open SSH and Tectia SSH versions 4 and 5.3.x.

25

Trust Protection Platform uses the Simple Message Transfer Protocol (SMTP) to communicate with a configured email server to send email notifications. The default SMTP port is 25.

161

Trust Protection Platform uses the Simple Network Management Protocol (SNMP) channel to send selected events to an SNMP management system via an SNMP trap.

445

Port 445 can be used for sending reports via the SMB protocol. Reports can also be sent using the FTP protocol (port 21).

514

The Venafi Log server can send log messages to a syslog server. By default, the Syslog channel uses UDP port 514, but an administrator may configure an alternate port in the Syslog channel configuration. The Log server can also use TLS for sending Syslog messages, if configured.

For more information, see About syslog channels.

Default Database Ports

1433

For more information on running the Trust Protection Platform database on a Microsoft SQL system, see Setting up your Microsoft SQL database server.